Reliable Frequency Starter for ABB and Siemens Blowers

Product Description

Decent Agriculture Ply Woodcase Soft Starter/Frequency Starter (ABB/Siemens) Septic Tank Blower

Product Description

The fan casing and stator of multi-stage centrifugal fans are usually made of cast iron, steel plate, stainless steel and other materials, and other materials will be determined according to specific working conditions and application requirements.

DECENT MACHINERY offers a full range of multistage centrifugal blowers with 20 models to choose from. We have the right blower for your application today and our Research and Development department is developing new models to meet your needs tomorrow.

Product performance ranges up to 98Kpa pressure or to -40Kpa vacuum and flows from 35 to 220 m³/min. Dacheng manufactures blower and process control systems as well as provides complete blower packages with accessories to meet a wide variety of applications.

Product Introduction
Series DM casting multistage centrifugal blower is a high efficient blower product which is developed by our company to introduce American technology and has advanced level in the world today.
This series of products adopts many proprietary or patented technologies, and the blower has much better performance than other competitors in lower noise level, lower vibration, and higher efficiency.

Product Parameters

 

Model	Air capacity	Pressure	Model	Air capacity	Pressure
C220	0 to 220m³/min	-27.4 to 68.6Kpa	C200	0 to 200m³/min	-29.4 to 73.5Kpa
C180	0 to 180m³/min	-35.3 to 88.2Kpa	C160	0 to 160m³/min	-40 to 98Kpa
C150	0 to 150m³/min	-40 to 98Kpa	C140	0 to 140m³/min	-40 to 98Kpa
C130	0 to 130m³/min	-40 to 98Kpa	C120	0 to 120m³/min	-40 to 98Kpa
C110	0 to 110m³/min	-40 to 98Kpa	C100	0 to 100m³/min	-40 to 98Kpa
C90	0 to 90m³/min	-35.3 to 88.2Kpa	C80	0 to 80m³/min	-35.3 to 88.2Kpa
C70	0 to 70m³/min	-35.3 to 88.2Kpa	C65	0 to 65m³/min	-35.3 to 88.2Kpa
C60	0 to 60m³/min	-31.4 to 78.4Kpa	C55	0 to 55m³/min	-31.4 to 78.4Kpa
C50	0 to 50m³/min	-31.4 to 78.4Kpa	C45	0 to 45m³/min	-31.4 to 78.4Kpa
C40	0 to 40m³/min	-31.4 to 78.4Kpa	C35	0 to 35m³/min	-31.4 to 78.4Kpa

Product Features:
1. The shell of the inlet and outlet, and return channel of the blower are fully adapted to the impeller, The streamlined design reduces loss.
2. The impeller is designed by a three-dimensional meridian plane and compound curve technology enjoys high efficiency.
3. The impeller intake diversion ring improves the inlet fluidity of the impeller.
4. The airfoil return-flow blade can reduce loss, and gets high static pressure.
5. The blower performance was optimized with fluid analysis technology, The polytropic efficiency is up to 78%.
6. The same blowers meet two rotating speeds of 50Hz and 60Hz, the blower range of adjustment is wide and performs better.
7. After strict dynamic balance, the rotor has low vibration, high reliability, and low overall noise.
8. The structure of the blower is advanced and reasonable. Easy-worn parts are few. Installation, operation, and maintenance are convenient.

Product Parameter:
Flow:5m3/min~1600m3/min
Pressure Rise:5kpa(G)~150kpa(G)

Application:
1. Water Treatment
2. Wastewater Treatment   
3. Biogas  Recovery
4. Vacuum Cleaning
5. Air Knife Dry
6. Floatation and Mineral Beneficiation
7. Galvanization Process and Electric Plating
8. Fluid and Piscina Oxygenation
9. Process  Gas Conveying
10. Papermaking and Printing
11. Air  Firing (Desulfurization, Carbon Black, Blast Furnace Process, and so on