Durable Boiler Ventilator for Efficient Smithing Furnace Operation

• Customization: Available
• Material: Stainless Steel
• Usage: for Manufacture
• Model NO.: DECENT1717
• Flow Direction: Centrifugal
• Pressure: High Pressure
• Certification: ISO, CE
• Voltage: 220V/380V/400V/415V/440V/450V/660V/1140V
• Motor Power: 1.5-5000kw
• Motor Brand: ABB/Siemens/Baldor/Teco/Westinghouse/Weg
• Impeller Testing: Dynamic Blancing Adjusting
• Rotation Speed: 1450rpm/960rpm/720rpm/590rpm
• Protection Grade: IP55/65
• Frequency: 50Hz/60Hz
• Exported to: 80 Countries USA, Canada, Russia, Japan
• Impeller Type: Backward/Forward/ Radial Blade
• Cooling Type: Air Cooling/Circulating Water Cooling
• Blade Material: Cast Iron, Plastic, Stainless Steel
• Warranty: 4 Years
• After-Sales Service: Field Installation, Commissioning and Training
• Temperature Resistance: High Temperature Proof (up to 500 °c)
• Efficiency(%): Over 85%
• Transport Package: Wooden Case for Sea Transportation
• Specification: Soft Starter/Frequency Starter (ABB/SIEMENS)
• Trademark: Decent
• Origin: China
• HS Code: 8414593000
• Production Capacity: 10000 Sets/ Year

Product Description

High-Temperature Industrial Boiler ID Blower Fan
 

	Impeller diameter	400~2600	mm
	Speed	730~2900	rpm
Material	boiler blower fan case	Q235, Q345, stainless steel	Design as special
	boiler blower fan shaft	45# steel, Q304, SS304,SS316L
	boiler blower fan impeller	Q304, 12Cr1Mov,15Crmov, 15MnV
Medium	10---500ºC	Dustiness<80 g/m3	incombustible
Motor	Siemens, ABB, WN, SIMO, LA	IP 54,55,56	3 phase
Optional	System base frame, Protective screening,
Components	Silencer, Inlet & Outlet pipeline compensator,
	Inlet & Outlet flange,  Damper, Electric actuator,
	Shock isolator, Diaphragm coupling, Fluid coupling,
	Motor rain cover, Temperature sensor, Vibrating sensor,
	Soft starter, Inverter, Special Electrical Motor,
	System monitoring Instrument,
	Lube system, Overhead lube tank.

Feature:
^{• IP 55/65
• 50hz/60hz
• Corrosion Proof
• 220v/380v/415v/440v/660v/1140v
• 1450RPM/960RPM/720RPM/590RPM
• High-Temperature Proof (up to 500 °C)
• Each fan's impeller has been well dynamic balanced.}

Structure:
^{♦ Impeller Type: Backward/Forward/ radial blade
♦ Driving Mode: Direct/belt/Coupling drivetrain
♦ System Type: Single inlet type, Overhang type.
♦ Cooling Type: Air cooling/Circulating Water cooling
♦ Bearing Lubrication Methods: Grease lubricating/Oil bath lubrication
Motor Brand: ABB /Siemens /Baldor / Teco/ Westinghouse Motor 
♦ Basic Components: 
Motor, Impeller, Impeller cone (Air Inlet), Case, Main shaft, 
Bearing, Bearing housing, Pin coupling, Foundation bolt. 
 System monitoring Instrument, Lube system, Overhead lube tank..}

Application:

_{Building ventilation
Oven exhaust
Drying system}

_{Moisture blow-off
Fume removal
Glass tempering}

_{Spray-booth exhaust
Air curtains
Cooling}

_{Dust collection
Air recirculation
Pneumatic conveying}

_{Combustion air
Food processing  
Ventilating}

^{Forced ventilating, Building ventilating, Mine ventilating, Tunnel ventilating, Materials ventilating, and drying.
♦ Cooling and heat dissipation
Forced cooling and heat dissipation, Industrial equipment cooling and heat dissipation.
♦ Air purification and industrial waste gas treatment, Air filtration system, Flue gas desulfurization, Flue gas denitrification.
♦ Boiler's air supply and exhaust (Coal-fired boiler, Biomass boiler, Garbage incinerator, CFB boiler, Stokerfeed boiler.).
♦ Industrial boiler blowing air, Industrial boiler inducing air, Industrial boiler primary air, Industrial boiler secondary air.
♦ Industrial boiler waste gas desulfurization, Industrial boiler flue gas denitrification.
♦ Industrial kilns, Inducing air of Cement rotary kiln, Lime rotary kiln, Nickel iron rotary kiln, Clay sand rotary kiln, and other various calcining kilns.}


♦ Energy and power: Thermal power plant, Garbage incineration power plant, Biomass fuel power plant, Industrial waste heat recovery device.
♦ Metal smelting: Blowing air of mineral powder sintering(Sintering machine), Furnace coke production(A furnace coke oven).
♦ Gas and materials delivery: General air delivery, High-temperature air delivery, Combustible gas delivery, Corrosive gas delivery, Gas mixed with impurity delivery.Delivery of coal powder, Particle material/ Powder material/ Fragment materials/Fiber materials.
♦ Other: Pressurization and decompression seal of industrial equipment, Recovery of industrial waste gas, Supply air, and drying of food and drug production line. 
 Characteristics  of  Single Inlet Industrial Boiler Centrifugal Exhaust Fan 2500 cfm
♦ Outputting higher gas pressure, and providing larger airflow volume, low noise.
♦ Blades angle going through optimizing design, higher wear resistance, longer service life.
♦ Can flexibly adjust fan's volume and pressure in running by air damper. Can also adjust fan's pressure and volume by changing the fan speed via matching variable frequency motor.
♦ In the case of using system base, so easy for installation, no need of professionals direction.
♦ Transmission efficiency higher than belt driving's, much lower of fan system energy loss.
♦ Flexible connection for motor shaft and transmission shaft, no need to tension or change the belt, low maintenance work exhaust fan
.
 

♦ Fan system whose impeller's diameter below 1400mm, is not needed to match bearing cooling device, can reduce the customer's cost and maintenance work.
♦ Can satisfy different dust loading conditions that low dust loading to a good deal dust loading, the surface hardness of impeller can reach HRC60~70 after special processing, greatly extending impeller's service life.
♦ Using liquid lubricating oil, no need to open bearing housing when changing or filling lubricating oil. Easy to observe the lubricating oil's quality and stock through inspection window on the bearing housing body of exhaust fan
♦ Bearing housing reserves installation place for temperature and vibration sensors can install easily of the fan running monitoring device.
♦ Bearing housing adopt labyrinth type mechanical seal, the unique design of spill prevention of inner, vent hole design on top, commis-sure coated with sealing grease, completely eliminating bearing housing oil leak.
♦ Selecting high-efficiency energy-saving motor of Chinese leading motor manufacturer( or customer required), reliable quality, low energy consumption.
♦ The motor load can be automatically reduced when airflow resistance is increasing, to prevent the motor from destroying.
♦ Customizing design according to customer's performance requirements, and optimizing by CFD technology, energy consumption lower than same fans.
♦ Adopting high-quality carbon steel manufacturing, or stainless steel and other metal materials according to customers' requirements.
♦ Fitting tightly of parts, good sealing, ensuring no reduction of output pressure.
♦ Impeller of annealing treatment, completely eliminating structure of internal stress when welding, ensuring impeller appearance won't occur creepage and flaw.
♦ The welding line of the impeller and main shaft passed ultrasonic flaw detection, ensuring no defect of welding and materials, guarantee strength.
♦ Impeller passed high standard dynamic balancing, ensuring stable running of fan.
♦ Running test and vibration value test for fans after finishing manufacturing, ensuring running reliably.
♦ Various optional components for your selection. 
  

Advantages:

•  ^{24*7 hours online service}
•  ^{More than 100 customers visited us and felt very satisfied}
• ^{Exported to over 80 countries}
• ^{CE,ISO,SGS,ETA,MA,AMCA}
• ^{Live video for the workshop by WhatsApp WeChat or youtube.}
•  ^{Oversee technical support at your site}
• ^{Better customers' experience after sales: we visit our customers each year}
• ^{Production according to your drawing(2D/3D)}
• ^{Famous motor brand(Siemens/ABB/TECO/WEG)}
• ^{High standard quality control- Testing video/Testing report available}
• ^{Welding / Materials testing report available}
• ^{Surface Treatment: automatic electrostatic powder coating ( ie spray) or spray paint.}
• ^{Corrosion protection and rust removal treatment}
• ^{Tracking number for each piece of equipment available}

FAQ: 
<sup>1.Price Term:FOB,CFR,CIF. 
2. Professional engineers team will help you find solutions.
3.12 months warranty and long-term marketing, after-sale support.
4. Certification of Origin, Form A, Form E, Form B, Form P, Form F, Form N, Form X offered to Help you save duty costs.
5.24 hours service online, If any questions, please contact us freely by e-mail or telephone.
6. Our minimum order quantity is just only 1 piece, so you can order one sample to test quality, if good, can order more.
7. We have full stock, and can deliver within a short time. Many styles for your choices. 
8. OEM and ODM order are accepted, any kind of logo printing or design are available.
9. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying our best to offer you.</sup>
 

What Should I offer to Order? Please advise the following:
1	Air Flow/Volume
2	Voltage:
3	Frequency:
4	Temperature
5	Pressure
6	The attitude of Operation Place